KONSERWACJA PREDYKCYJNA · SIEĆ WARSZTATÓW

Twój rower,
zawsze w formie

Konserwacja, która wywęszy problemy, zanim zostawią cię na lodzie — w jednym abonamencie. Ty pedałujesz: resztą zajmują się warsztaty sieci (z małą pomocą AI).

Pobierz z App Store Pobierz z Google Play
Sztuczny węch GPS + czujniki Strava Sieć warsztatów
CrankPal app — bike health and predictive maintenance
PROBLEM

Dbanie o rower bywa kłopotliwe

Konserwacja reaktywna

Naprawiasz dopiero, gdy coś się zepsuje. Nieoczekiwane koszty i przestoje.

Brak standardów

Ceny, jakość i czas realizacji różnią się w zależności od warsztatu. Brak gwarancji.

Brak lojalności

Rowerzyści nie mają jednego punktu odniesienia ani stałej relacji.

Inne aplikacje ostrzegą cię, że łańcuch jest zużyty. I co dalej? Dalej radzisz sobie sam: bez warsztatu, bez serwisu, bez niczego.
ROZWIĄZANIE

CrankPal: dbanie o rower, wszystko w jednym

01

Aplikacja predykcyjna

Szacuje zużycie na podstawie przebiegu, pogody i interwałów producenta — staje się coraz precyzyjniejsza wraz z historią roweru.

02

Abonament all-in

Planowa konserwacja w jednej miesięcznej opłacie.

03

Sieć warsztatów

Serwis na miejscu ze standardami jakości CrankPal, w sieci, która rośnie miasto po mieście.

Dane, które wyostrzają prognozy: GPS, czujniki ruchu smartfona, integracja ze Strava i historia konserwacji → coraz dokładniejsze prognozy zużycia.
TECHNOLOGIA

Od reaktywności do predykcji

Algorytmy CrankPal łączą wiele źródeł danych, aby przewidzieć zużycie, zanim stanie się awarią.

ŹRÓDŁA DANYCH
◉
GPStrasy, dystans, przewyższenia
▦
Czujniki ruchuwibracje i styl jazdy z Twojego smartfona
◎
Wheel sensorwheel revolutions from a Bluetooth speed sensor, any brand
⚡
Strava e Garminautomatyczna synchronizacja przejazdów
⌛
Historia komponentówwcześniejsze konserwacje i wymiany

CrankPal AI Engine

Modele prognozowania zużycia trenowane na rzeczywistych danych użytkowania i konserwacji.

poprawia się z każdym kilometrem
WYNIK
▲
Prognoza zużycia"Klocki hamulcowe za 150–220 km"
!
Alerty przed awariąpowiadomienia w odpowiednim czasie, gotowe do działania
♥
Szacowany stan roweruaktualizowany po każdej jeździe, zawsze w kieszeni
The Prediction tab of the CrankPal app: the bike photo, the sources of the estimate, the bike status and the recognised Garmin sensor
The Prediction tab: part by part, what is left and where the estimate comes from.
Galeria widgetów iOS z widgetem CrankPal w dwóch rozmiarach: kontrolki grup komponentów, licznik kilometrów i zaproszenie do zarezerwowania przeglądu
WIDGET

Kokpit Twojego roweru na ekranie początkowym

Pięć kontrolek jak na desce rozdzielczej samochodu: napęd, hamulce, koła, układ kierowniczy i punkty kontaktu. Zielone, gdy wszystko w porządku, żółte, gdy warto zaplanować przegląd, czerwone, gdy rower lepiej sprawdzić, zanim znów na niego wsiądziesz. Niżej licznik kilometrów: całkowity i od ostatniego przeglądu. Bez otwierania aplikacji.

  • Trzy rozmiary: mały, średni i duży, z legendą kontrolek
  • Te same prognozy co w aplikacji, aktualizowane po każdej jeździe
  • Jedno dotknięcie i jesteś w aplikacji, gotowy do rezerwacji
Ride sources in the CrankPal app: phone motion, automatic GPS and a compatible sensor, each with its upsides and its limits
RIDES THAT RECORD THEMSELVES

No Strava, no Garmin, no Start button

Your phone already knows when you are on a bike: it keeps seven days of motion history, and CrankPal reads it back when you open the app. Rides recognised with confidence go in on their own, the others are proposed to you. No battery, no location permission, no account to connect. If you want the route on the map as well, turn on automatic GPS: it starts when you set off and stops when you stop. And Strava or Garmin, if you have them, carry on as before: the sources live side by side, and if the same ride arrives from two of them the kilometres count once.

  • Phone motion: kilometres estimated from the duration and labelled as such, with no GPS and no battery drain
  • Automatic GPS: exact kilometres and the route on the map, without pressing Start
  • Strava and Garmin stay an option, not a requirement: the app works on its own
The CrankPal app: the guide to pairing a third-party speed sensor, and the bike screen with the Garmin Speed Sensor 2 recognised, connected and showing its battery charge
YOU ALREADY HAVE THE SENSOR OPTIONAL, WORKS WITHOUT IT TOO

Any speed sensor will do, and the kilometres become exact

If there is already a Bluetooth speed sensor on your wheel, CrankPal uses it: Garmin, Wahoo, Magene, XOSS, CooSpo, iGPSPORT, Bryton, Polar, SIGMA, CatEye, Bontrager, Giant. All it takes is the standard CSC profile, the one fitted to just about every speed sensor on sale, and fifteen euros will do. It counts wheel revolutions, so it measures your kilometres instead of estimating them: no GPS, even with the app closed and the phone in your pocket. You pair it with a bike once, and from then on every ride lands on the right bike without you choosing anything.

  • Make and model recognised on their own, with the sensor's photo in the app
  • One sensor per bike: rides are attributed by themselves, even if you own three
  • Battery charge always in view, in the app and on your bike shop's screen
  • GarminSpeed Sensor 2
  • GarminSpeed Sensor
  • WahooSPEED
  • WahooTRACKR SPEED
  • WahooBlue SC
  • MageneS3+
  • CooSpoBK467
  • XOSSVortex
  • iGPSPORTSPD70
  • BrytonSmart Speed Sensor
  • SIGMADUO Speed
  • CatEyeISC-12
  • PolarSpeed Sensor
  • BontragerDuoTrap S
  • GiantRideSense

These are the ones CrankPal knows by make and model, with their photo. But any Bluetooth speed sensor with the standard CSC profile will count your kilometres, even if it is not on this list.

COMING SOON The CrankPal Sensor box: a photo of the black sensor with crankpal sensor lettered on its lid, the speed, Bluetooth, IP67 and battery-life icons, and Cranky on the side
NEW · CRANKPAL SENSOR

The sensor that counts every ride, even without your phone

It sits on the hub and counts every turn of the wheel: exact kilometres, road surface and elevation reach the app and your bike shop's service forecasts, even when your phone stayed home.

  • Stores more than 200 rides and hands them to the app the next time it connects
  • Feels tarmac, cobbles and gravel: wear is estimated on the roads you actually ride
  • Works with your bike computer, or stays locked to your profile
Discover the sensor
PLANY

Trzy plany dla rowerzystów

BASE
Za darmo
Bezpłatnie dla klientów warsztatów, które korzystają z CrankPal Workshop.
  • Full app + AI service forecast
  • Bike dashboard with the five lamps
  • Rides from GPS, Strava, Garmin or a wheel sensor
  • Your workshop's jobs and quotes in the app
  • Widgets and lock screen
  • Przypomnienia i historia
Pobierz aplikację Pobierz aplikację
Wkrótce
PLUS
Wkrótce
PREMIUM
SIEĆ WARSZTATÓW

Znajdź najbliższy warsztat CrankPal

Warsztaty już działające w sieci, ze standardami CrankPal: rezerwujesz w nich wizytę prosto z aplikacji.

CrankPal Point Certified Partnerskie W katalogu CrankPages

Warsztaty CrankPal mają zweryfikowaną rejestrację VAT. Pozostałe pochodzą z CrankPages, publicznego katalogu warsztatów rowerowych.

POBIERZ APLIKACJĘ

Stan zdrowia Twojego roweru, zawsze w kieszeni

Pobierz CrankPal i zacznij śledzić zużycie swoich komponentów. Rejestracja pierwszego roweru zajmuje tylko kilka minut.

Pobierz z App Store Pobierz z Google Play

Chcesz wypróbować wersje przedpremierowe? Dołącz do bety

Aplikacja CrankPal: stan roweru i prognoza zużycia łańcucha wraz z rezerwacją serwisu
FAQ

Najczęściej zadawane pytania

When does the app launch? Can I try it now?

Tak: na iPhone'a i iPada jest w App Store, a na Androida w Google Play.

Jak CrankPal przewiduje zużycie komponentów?

Silnik AI CrankPal łączy GPS, czujniki ruchu smartfona, dane ze Strava oraz historię konserwacji, aby oszacować pozostałą żywotność każdego komponentu — i ostrzega Cię, zanim stanie się to awarią.

Czy muszę instalować czujniki na rowerze?

Nie. Wystarczy smartfon, który już masz przy sobie: GPS i czujniki ruchu wykonują całą pracę. Integracja ze Strava jest opcjonalna i automatycznie synchronizuje Twoje przejazdy.

Which bikes does it work with?

All the main categories: city, road, gravel and cyclocross, MTB and downhill, triathlon and track, folding and cargo — e-bikes included. Register yours in a couple of minutes and the predictions tune themselves to how you ride.

What happens to my ride data?

It is used to estimate the wear on your bike's components: distance, routes and riding conditions feed the predictions. All the details are in the privacy policy.

Czy mogę zrezygnować w każdej chwili?

Tak. Abonament jest miesięczny, bez zobowiązań: zmieniaj plan lub rezygnuj w każdej chwili, prosto z aplikacji.

Gdzie mogę znaleźć warsztaty partnerskie?

Aplikacja pokazuje mapę warsztatów partnerskich z dostępnością w czasie rzeczywistym. Sieć się rozrasta, zaczynając od największych włoskich miast.

Prowadzę warsztat: ile kosztuje dołączenie?

Zależy od poziomu partnerstwa: od prostej umowy aż po franczyzę CrankPal Point. Wszystkie szczegóły znajdziesz na dedykowanej stronie dla warsztatów.

Prowadzisz warsztat rowerowy?

Poznaj program partnerski: więcej klientów i gotowe diagnozy AI.

Informacje dla warsztatów
Z bloga

Więcej z bloga

Przejdź do bloga →